Canon VB-M741 LE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB - Page 54
Set the Focus and Exposure Compensation, Change the Camera Zoom Ratio, Set the Focus
View all Canon VB-M741 LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Change the Camera Zoom Ratio You can change the zoom ratio of the camera with the [Zoom] buttons or [Zoom] slider. Operation will continue while you hold a [Zoom] button down and stop when you release it. Zooms in. Zooms out. If you drag the slider handle, the camera zoom ratio will change according to the position on the slider. If you select [Digital Zoom] > [Enable], the maximum optical telephoto icon and digital zoom range will appear and you will be able to use digital zoom. The higher the digital zoom ratio, however, the lower the video quality becomes. Digital Zoom Range Optical telephoto end icon Set the Focus and Exposure Compensation This focuses on the subject. Adjust exposure to suit the brightness of subjects. Note The exposure compensation value set with the Camera Angle Setting Tool will be reset when the camera is rebooted. Set the Focus You can automatically or manually focus on subjects, or set focus to infinity. You can use One-shot AF to focus on subjects manually. (1) (2) (3) (4) (5) (1) [Auto] Automatically focuses on the subject. (2) [Manual] Use buttons ((4) and (5)) to manually adjust focus. (3) [Fixed at Infinity] Fixes the focus near infinity. (4) [One-shot AF] Use when the focus mode is set to [Manual]. When you click this, it will focus once using autofocus and then switch to manual focus. (5) Far and Near Buttons Use to adjust focus when the focus mode is set to [Manual]. Focus will change while you hold the buttons down and stop when you release them. 54