Canon VB-S900F Mark II Network Camera Operation Guide - Page 217
[Maintenance] > [General] Displaying Camera Device Information and Perform Maintenance
View all Canon VB-S900F Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
[Maintenance] > [General] Displaying Camera Device Information and Perform Maintenance Check camera information, such as the firmware version, and perform maintenance on the camera system. The following settings can be configured here. • Device Information • Tool 5 • Initialization Setting Page Device Information [Model Name], [Firmware Version], [Serial Number], [Build Number] and [MAC Address] Displays information about the camera. Tool You can configure/reboot the camera and display licenses. [View Current Settings] Display a list of current settings for the Setting Page. [View License] Display information on the third-party software licenses. [Reboot] Reboot the camera. Initialization Initialize the camera. Caution • You must not turn off the camera while [Restore Default Settings] is in operation. Turning off the camera at this stage may result in disabling its ability to boot correctly. • Once [OK] is clicked, you can no longer stop the process of restoring the default settings. [Network Settings] If you set this to [Save], the following settings are retained when initializing. • Administrator Name • Administrator Password • Network Settings • NTP Server • HTTP Server 199