Canon VB-S900F Mark II Network Camera Operation Guide - Page 220
[Maintenance] > [Update Firmware] Updating the Camera Firmware, Device Information, Update Firmware
View all Canon VB-S900F Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
[Maintenance] > [Update Firmware] Updating the Camera Firmware You can update the firmware. The following settings can be configured here. • Update Firmware Device Information [Model Name] and [Firmware Version] Displays the information about the connected camera. Update Firmware Configure the settings related to firmware updates. Caution You must not turn off the camera while it is performing the [Update Firmware] operation. Turning off the camera at this stage may result in disabling its ability to boot correctly. [Restore Default Settings] The initial settings are restored when the firmware is updated. If you set this to [Restore], the following settings are retained when initializing. • Administrator Name • Administrator Password • Network Settings • NTP Server • HTTP Server • Host Access Restrictions • Time Zone • Certificates • Private Key • IPsec [Update Firmware] Click [Browse], specify a firmware file for update, and click [Exec]. When the confirmation message is displayed, click [OK] to start the firmware update. The camera is rebooted after the firmware is updated. 202