Canon VIXIA HG10 Corel Application Disc Ver.2 Instruction Manual - Page 14

• For Windows Vista users: Depending on the configuration of your computer, playback quality may be affected by whether the Windows Aero graphic interface is activated or not. If you experience some anomalies during playback even though your computer complies with the system requirements, try turning the Windows Aero function on or off. • Playback quality may be affected by the power saving mode of the operating system or the video card. If you are using a laptop computer, try connecting it directly to a power outlet. • This program cannot be used to play back CPRM-protected discs. IF A DISC CREATED WITH DVD MOVIEFACTORY SE CANNOT BE PLAYED BACK CORRECTLY If you play back a high-definition disc created with DVD MovieFactory SE on an external AVCHD-compatible DVD device you may notice that the video freezes for a few seconds between scenes. In such case, perform the following procedure to create a new disc where all video is read as one continuous scene. 1 After adding the scenes you want to include in the disc, select the first scene. 2 Press and hold the Shift key and select the last scene. 3 With all the scenes selected, click [Join Video]. 5 Click [Remove All Chapters] and click [OK]. All the scenes will be combined into one scene and will appear as a single scene when playing back the disc. IF DVD MOVIEFACTORY SE OR WINDVD SE ARE NOT WORKING CORRECTLY If you have the editing software Roxio MyDVD for Canon installed in your computer, DVD MovieFactory SE or WinDVD SE may not work correctly. In such case, follow the procedure below to solve the compatibility problem. Close any running Corel applications before continuing. 1 From the Start menu, open [My Computer]. 2 Right-click on the icon of the DVD drive, and select [Properties]. 3 Select the [UDF Reader] tab and remove the check mark from the [Enable UDF Reader on your drives] option. 4 Click [Apply], then click [OK]. 5 Start the Corel software. 4 Click [Add/Edit Chapter]. 14