Canon imageFORMULA CR-190i II CR-190i II User Manual - Page 10

■ When you remove the power cord, grip it by the power plug head. Never attempt to disconnect the power cord from the power outlet by pulling on the power cord. Doing so may damage or expose the cord's internal wiring, and cause a fire or electrical shock. ■ Keep the area around the power outlet clear of all obstacles so you can disconnect the power cord easily at all times. ■ Never spill water or volatile solutions (alcohol, benzene, paint thinner) into the scanner. Doing so may cause a fire or electrical shock. ■ When the scanner is not being used for a long period of time, disconnect the power cord from the power outlet. ■ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or long hair that could become entangled with moving parts, especially the rollers that feed paper into the scanner. If such objects become entangled, immediately disconnect the power plug from the power outlet to stop the scanner. ■ Be careful when you are loading a document or clearing a paper jam. It is possible that the paper edges may cut your fingers. ■ Do not open the Maintenance Cover while the scanner is operating. Doing so may result in a malfunction or injury. ■ Do not touch the pins and contacts on the scanner's connector with your hands. Doing so may result in a malfunction. ■ Do not touch anything except the operation buttons when the jogger is operating (CR-190i II/CR-190i II UV only) or documents are being fed. ■ Do not turn the scanner upside down. The ink may leak from the ink disposal tank. Installation Location 100 mm (3.9") 125 mm (5") 356 mm (14") 466 mm (18.3") 706 mm (27.8") For operation, maintenance, and ventilation, make sure that there is enough space around the scanner, as shown in the illustration above. Avoid placing the scanner in the following places. It may cause a malfunction and adversely affect the scanner or your computer. • Places exposed to direct sunlight If installation in such places is unavoidable, provide a curtain or similar object to shade the scanner. • Places subject to dust and fumes Dust and cigarette fumes adversely affect the components inside the scanner. • Near running water, a heat source, water vapor, or in an area, such as a laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals • Places subject to excessive vibration and shock 10