Canon imageFORMULA CR-190i II CR-190i II User Manual - Page 50

Cleaning with the Cleaning Cards, United States Only, Pull the Eject Stopper. - series

Get Canon imageFORMULA CR-190i II PDF manuals and user guides View all Canon imageFORMULA CR-190i II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Cleaning with the Cleaning Cards (United States Only) If a black stripe appears on the back-side of scanned images or if dirt appears on the paper documents upon scanning or for preventative measures, we recommend that you clean your Canon CR-Series scanner as needed with a cleaning card. Using a cleaning card will minimize the frequent cleaning as instructed in this manual. It is best to perform a cleaning at beginning or end of the day. A cleaning card does not clean the ink jet nozzles, so please remove the ink cartridge and perform a nozzle cleaning (See "Cleaning the Ink Jet Nozzles," on p. 49.) IMPORTANT • This operation is for the Cleaning cards in the United States are available only in the United States. • Contact your local authorized Canon dealer or service representative for the available cleaning card. A Turn OFF the scanner. B Disconnect the scanner and the computer. C Turn ON the scanner with pressing the START Button and the STOP Button. NOTE If the scanner turned ON properly, the power LED continues to flash. D Press the Function Button to turn its LED off. E Pull the Eject Stopper. F Place the cleaning card in the document tray. G Press the START Button to start cleaning. H Please repeat steps 6 and 7. A typical cleaning is feeding the cleaning card 3 to 7 times. If the scanner is extremely dirty, you may need to use another cleaning card. I Turn OFF the scanner. J Connect the scanner and the computer. NOTE Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from the cleaning card to thoroughly dry before scanning documents. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
50
Cleaning with the Cleaning Cards
(United States Only)
If a black stripe appears on the back-side of scanned images or if dirt
appears on the paper documents upon scanning or for preventative
measures, we recommend that you clean your Canon CR-Series
scanner as needed with a cleaning card. Using a cleaning card will
minimize the frequent cleaning as instructed in this manual.
It is best to perform a cleaning at beginning or end of the day. A cleaning card
does not clean the ink jet nozzles, so please remove the ink cartridge and
perform a nozzle cleaning (
See “Cleaning the Ink Jet Nozzles,” on p. 49
.)
IMPORTANT
• This operation is for the Cleaning cards in the United States are
available only in the United States.
•
Contact your local authorized Canon dealer or service representative
for the available cleaning card.
A
Turn OFF the scanner.
B
Disconnect the scanner and the computer.
C
Turn ON the scanner with pressing the START Button and the
STOP Button.
NOTE
If the scanner turned ON properly, the power LED continues to flash.
D
Press the Function Button to turn its LED off.
E
Pull the Eject Stopper.
F
Place the cleaning card in the document tray.
G
Press the START Button to start cleaning.
H
Please repeat steps 6 and 7.
A typical cleaning is feeding the cleaning card 3 to 7 times. If the
scanner is extremely dirty, you may need to use another cleaning
card.
I
Turn OFF the scanner.
J
Connect the scanner and the computer.
NOTE
Allow 1 to 2 minutes for the moisture on the Canon CR-Series scanner from
the cleaning card to thoroughly dry before scanning documents.