Canon imageFORMULA CR-190i II CR-190i II User Manual - Page 35
Scan Batch to Printer, Eject Pocket 3, Flapper, Ink residue, Printed text or bitmap, back side
View all Canon imageFORMULA CR-190i II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Scan Batch to Printer A Click [Scan Batch to Printer] from the [File] menu. B Select Simplex or Duplex, and then click [Start Scanning]. • You can also start scanning with pressing the START Button. F Scanning starts. NOTE • If "Sort Method" is set in the software application, the document will be ejected to one of the three Eject Pockets according to the sort methods that have been set. Eject Pocket 3 Flapper Separates documents Eject Pocket 1 Eject Pocket 2 • When printing with the imprinter, ink may get on the leading edge of the document because the documents are ejected onto the printed surface. • When Using the Accompanying Scanning Utility for CR-135i/CR-190i: Scanning is suspended and a message is displayed when the Eject Pocket becomes full of documents. Scanning resumes when the documents are removed from the Eject Pocket (Eject Pocket full detection). This function is available only on CR-135i II/CR-190i II/CR-190i II UV. When documents that are 120 to 139 mm in length are ejected into Eject Pocket 3, scanning may resume even if the pocket is not completely empty. Make sure to remove all of the documents at one time when removing such documents from this eject pocket. IMPORTANT If you configure scanning conditions that consume a large amount of the computer's memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again. Ink residue Printed text or bitmap (back side) 35