Canon imageFORMULA DR-C225 DR-C225 / DR-C225W User Manual - Page 89

Close the front unit by gently pushing it up on both sides until it clicks

Page 89 highlights

4 Clean the rollers. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a dry, soft cloth to wipe away any moisture. 7 Reattach the retard roller and feed roller. (See "Replacing the Feed Roller" on p.96, "Replacing the Retard Roller" on p.97) 8 Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. 5 Remove the retard roller and feed roller. (See "Replacing the Feed Roller" on p.96, "Replacing the Retard Roller" on p.97) 9 Close the document feed tray. Remove the retard roller and feed roller from the scanner to clean them, and make sure to reattach them to the scanner when cleaning is finished. 6 Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out. 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

89
4
Clean the rollers.
Wipe the rollers with a cloth that has been dampened with water and thoroughly
wrung out, and then use a dry, soft cloth to wipe away any moisture.
5
Remove the retard roller and feed roller. (See "Replacing the Feed
Roller" on p.96, "Replacing the Retard Roller" on p.97)
6
Wipe the removed rollers with a cloth that has been dampened with
water and thoroughly wrung out.
7
Reattach the retard roller and feed roller. (See "Replacing the Feed
Roller" on p.96, "Replacing the Retard Roller" on p.97)
8
Close the front unit by gently pushing it up on both sides until it clicks
into place. Make sure that the front unit is completely closed by
pushing until you hear a click.
9
Close the document feed tray.
Remove the retard roller and feed roller from the scanner to clean them,
and make sure to reattach them to the scanner when cleaning is
finished.