Canon imageFORMULA R50 User Manual - Page 94
Removing the Document Feed Tray, About the Canon imageFORMULA Driver Setting Tool
View all Canon imageFORMULA R50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Hint A counter reset is done from the Canon imageFORMULA Driver Setting Tool. (See p. 94) Removing the Document Feed Tray When you will store or otherwise not use the scanner for a long period of time, remove the document feed tray. About the Canon imageFORMULA Driver Setting Tool What is Canon imageFORMULA Driver Setting Tool? The Canon imageFORMULA Driver Setting Tool can be used to check the information of the scanner, or to configure the maintenance settings. Canon imageFORMULA Driver Setting Tool consists of the following tabs. [Information] tab You can check the firmware's version information and scanner information. [Maintenance] tab You can reset the counter of the roller, or carry out the shrinkage rate control. [Control] tab You can carry out the control settings of hardware and drivers, and perform the read or write of the control settings. From the configuration of the hardware, you can set the automatic power-off function. [Diagnostic] tab You can output or delete the log file. [Network monitor] tab You can see the scanners on the network. You can also display a Web menu screen to make various scanner settings. "Web Menu" (See p. 77) IMPORTANT A USB connection is required to make this setting with the Canon imageFORMULA Driver Setting Tool. When connected via Wi-Fi, making this setting with the Canon imageFORMULA Driver Setting Tool is ineffective. 94