Canon imageFORMULA R50 User Manual - Page 97

Remote port: Specific Ports

Get Canon imageFORMULA R50 PDF manuals and user guides View all Canon imageFORMULA R50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

9. Set each item as follows, and then click [Next]. Protocol type: UDP Local port: Specific Ports Port Number: 5353 Remote port: Specific Ports Port Number: 5353 10. Select [Any IP address] for both local IP address and remote IP address, and then click [Next]. 11. Select [Allow the connection], and then click [Next]. 12. Specify when the rule is applied, and then click [Next]. 13. Enter a name, and then click [Finish]. (7) Confirm that the access point is operating correctly. (8) Turn both this scanner and the access point off and back on, and attempt the Wi-Fi connection again. (9) The scanner may be positioned too far from the access point. Connection is not possible if the distance is too far. (10) There may be a wall or furniture between the access point and the scanner that is blocking the connection. Reposition the devices or move them closer together. (11) Cordless phones, microwave ovens and radio signals from other appliances can interfere with Wi-Fi signals. Keep Wi-Fi devices away from such appliances. (12) When an access point's stealth function is enabled, it cannot be detected during Wi-Fi setup. Disable the stealth function or use manual setup to enter the correct SSID of the access point. (13) When the access point's MAC filtering function is enabled, the MAC address of this scanner must be registered. (14) Wi-Fi connections are not recognized when connected via USB. Operate the touch panel to switch the connection method. (See p. 38) Problem 4 Solutions Problem 5 Solutions Problem 6 Solutions Problem 7 Solutions The scanner turned off automatically. When the scanner's auto power off function is enabled, the scanner's power is automatically turned off after 4 hours, regardless of whether a connection is active. Turn the scanner back on, and as necessary, disable the Auto Power Off. I want to reset to the factory default settings. The scanner's initialization is done on the touch panel settings menu (See p. 37) or the Web menu on the browser (See p. 86). Automatic connection to the network is not possible. If your network environment supports DHCP, consult your network administrator. If your network environment does not support DHCP, configure the IP address manually. After doing settings on the Wireless Connection Tool, an error occurs and the scanner cannot be used (or found). Immediately after setup with the Wireless Connection Tool, the computer's network connection may be unstable. Please wait for a while or restart the computer. 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
97
9.
Set each item as follows, and then click [Next].
Protocol type: UDP
Local port: Specific Ports
Port Number: 5353
Remote port: Specific Ports
Port Number: 5353
10. Select [Any IP address] for both local IP
address and remote IP address, and then click
[Next].
11. Select [Allow the connection], and then click
[Next].
12.
Specify when the rule is applied, and then click
[Next].
13. Enter a name, and then click [Finish].
(7)
Confirm that the access point is operating
correctly.
(8)
Turn both this scanner and the access point off
and back on, and attempt the Wi-Fi connection
again.
(9)
The scanner may be positioned too far from the
access point. Connection is not possible if the
distance is too far.
(10) There may be a wall or furniture between the
access point and the scanner that is blocking the
connection. Reposition the devices or move them
closer together.
(11) Cordless phones, microwave ovens and radio
signals from other appliances can interfere with
Wi-Fi signals. Keep Wi-Fi devices away from such
appliances.
(12) When an access point’s stealth function is
enabled, it cannot be detected during Wi-Fi setup.
Disable the stealth function or use manual setup to
enter the correct SSID of the access point.
(13) When the access point’s MAC filtering function is
enabled, the MAC address of this scanner must be
registered.
(14) Wi-Fi connections are not recognized when
connected via USB. Operate the touch panel to
switch the connection method.
(See p. 38)
Problem 4
The scanner turned off automatically.
Solutions
When the scanner’s auto power off function is enabled,
the scanner’s power is automatically turned off after 4
hours, regardless of whether a connection is active.
Turn the scanner back on, and as necessary, disable
the Auto Power Off.
Problem 5
I want to reset to the factory default settings.
Solutions
The scanner’s initialization is done on the touch panel
settings menu
(See p. 37)
or the Web menu on the
browser
(See p. 86)
.
Problem 6
Automatic connection to the network is not
possible.
Solutions
If your network environment supports DHCP, consult
your network administrator. If your network
environment does not support DHCP, configure the IP
address manually.
Problem 7
After doing settings on the Wireless Connection
Tool, an error occurs and the scanner cannot be
used (or found).
Solutions
Immediately after setup with the Wireless Connection
Tool, the computer’s network connection may be
unstable. Please wait for a while or restart the
computer.