Canon imagePROGRAF TX-4000 MFP T36 series User Manual - Page 126
Changing Attachment Position of basket
View all Canon imagePROGRAF TX-4000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Important • If you are changing the angle of the basket arm, make sure the thick part of the basket arm is pulled out as far as possible. • When changing the angle of the basket arm, hold the thick part of the left/right basket arm, and adjust them. • While using the basket locking support, do not apply excessive force to the orientation in which you lower the basket arm. Doing so may damage the basket. • While using the basket locking support, you cannot use "Printing on Large-Format or Easily Damaged Paper (Position 3)." When using this position, detach the basket locking support. • While using the basket locking support, you cannot store the basket. When you store the basket, detach the basket locking support. Storing the Basket Changing Attachment Position of basket You can attach the basket rod (cord side) to the stand's rod holder or the front of the printer. To attach, hang both sides of the basket rod (cord side) on the paired attachment locations shown in the illustration. 126