Canon imagePROGRAF TX-4000 MFP T36 series User Manual - Page 434
Maintenance, Head replacement
View all Canon imagePROGRAF TX-4000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 434 highlights
• When using sheets, remove the sheet. Removing Sheets 2. Clean inside top cover. Cleaning Inside the Top Cover 3. Tap Maintenance on HOME screen. Touch Screen The Maintenance screen appears. 4. Tap Head replacement. A confirmation message appears. 5. Tap Yes. Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure appear on the touch screen. It takes about 3 minutes for ink to be drawn into the system and remove ink from the print head. 6. Open top cover. 7. If the print head locking cover and print head lock lever are dirty, use a damp cloth that you have wrung out completely to wipe them clean. 434
•
When using sheets, remove the sheet.
Removing Sheets
2.
Clean inside top cover.
Cleaning Inside the Top Cover
3. Tap
Maintenance
on HOME screen.
Touch Screen
The
Maintenance
screen appears.
4. Tap
Head replacement
.
A confirmation message appears.
5. Tap
Yes
.
Ink begins being drawn in. When it finishes, instructions for the print head replacement procedure
appear on the touch screen.
It takes about 3 minutes for ink to be drawn into the system and remove ink from the print head.
6.
Open top cover.
7.
If the print head locking cover and print head lock lever are dirty, use a damp cloth that
you have wrung out completely to wipe them clean.
434