Canon imagePROGRAF TX-4000 MFP T36 series User Manual - Page 203

IPv6 link-local prefix length XXX (up to 3 digits) MAC address XX:XX:XX:XX:XX:XX (12 characters) IPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable Pre-shared key XXXXXXXXXXXXXXXX (16 characters) Printer name XXXXXXXXXXXXXXX (up to 15 characters) Bonjour service name XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters) Wireless Direct device name XXXXXX-XXXXXXseries Root cert. thumbprint (SHA-1) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Root cert. thumbprint (SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ("XX" represents alphanumeric characters.) ◦ Print LAN details Prints out the network setting information list. Printing Network Settings Note • You can also print out the network setting information list by selecting Print LAN details on Test print. Test print • Other settings Important • You cannot select the items below when Disable LAN is selected for Change LAN. ◦ Set printer name Specifies the printer name. You can use up to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. ◦ TCP/IP settings Performs IPv4 or IPv6 setting. ◦ WSD setting 203