Canon imagePROGRAF TX-4000 MFP T36 series User Manual - Page 91
Manual when using media that cannot be cut with the cutter blade
View all Canon imagePROGRAF TX-4000 MFP T36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Note • If the Home screen does not appear, tap the HOME button. 2. Tap paper feed slot where roll paper for which you want to set cutting method is loaded. 3. Tap Paper settings. 4. Tap Advanced. 5. Tap Cutting mode. 6. Tap Eject cut. 7. Print the job. When printing is finished, the printer will stop without cutting. 8. While holding printed document to prevent it from dropping, tap Cut paper to cut roll paper. Manual (when using media that cannot be cut with the cutter blade) Note • Once the following step has been performed, the procedure can be started from step 8 the next time. • Printing the second and subsequent times • Printing after replacing with the same type of paper 1. Tap paper settings display area on Home screen of touch screen. 91