Canon imagePROGRAF W6400 MCT-E.pdf - Page 22
Roll Paper Margin for Safety
View all Canon imagePROGRAF W6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Media Configuration Tool Guide Chapter 4 Adding Media Types 2. Click the Media Type Detailed Settings button to open the Media Type Detailed dialog box. 3. Set the Drying Time for the media type to be added. a. Set the between pages (Drying Time) in Between Pages in Drying Time. The following settings are available for drying time in Between Pages. Between Pages No 30 sec. 1 min., 3 min., 5 min., 10 min., 30 min., 60 min. Setting This eliminates the wait time for the ink to dry. The sheet is ejected when the specified time after printing has elapsed. Increase the value for this setting with media that does not dry quickly. b. Set the between scan drying time from the Between Scans list in Drying Time. The following settings are available for drying time in Between Scans. Between Scans No, 1 sec., 3 sec., 5 sec., 7 sec., 9 sec. Setting For media that has problems, such as ink smears on the page or colors that seem uneven during borderless printing etc., increase the value for this setting. 4. Set the Roll Paper Margin for Safety of the media type to be added. a. Set the length of the near end margin for the roll paper from the Near End Margin list in Roll Paper Margin for Safety. The following settings are available for Near End Margin. Near End Margin 5 mm 20 mm Setting For media that has no problem when printing with a standard size margin. For media that has a strong tendency to curl, causing the printhead to scratch the surface. b. Set the length of the far end margin for the roll paper from the Far End Margin list in Roll Paper Margin for Safety. 4-5