Canon imagePROGRAF W6400 HDI-E.pdf - Page 20

imagePROGRAF HDI Driver Guide Setting Up a Print Job 2. Select a setting from the Brightness list. Brightness presents the following items for selection. Brightness Dark Slightly Dark Standard Slightly Bright Light Setting Details Prints a printout much darker than normal. Prints a printout slightly darker than normal. Prints the printout with normal brightness. Prints a printout slightly brighter than normal. Prints a printout much brighter than normal. 3. Select Adj. Pale Color Recognizable as needed. Note When Adj. Pale Color Recognizable is selected, yellow or cyan lines or other portions of images that are difficult to see when printed in white space can become easier to see. 4. Click the OK button. ■ Media Detailed Settings You can use the printer operation panel to perform suitable settings for ink drying time of each media and other features. You can also so some of these settings in the Media Detailed Settings dialog box. If the appearance of your printouts is not satisfactory, perform the settings on this screen to make adjustments and improve the printing results. To open the Media Detailed Settings dialog box, in the Custom Properties dialog box click the Media Detailed Settings button. Note The settings in the Media Detailed Settings dialog box are temporary; after the print job finishes the settings of the printer operation panel are restored. The procedures for performing the settings for each item in the Media Detailed Settings dialog box are described below. Drying Time You can set the time that the printer waits before it ejects another sheet (time between pages), or the time between the printer waits each time it prints a line (time between scans) for each type of media. 1. If the ink on the media is difficult to dry, in the Media Detailed Settings dialog box select a time for from the Between Pages list under Drying Time to set the drying time between pages. 3-7