Canon imagePROGRAF W7200 User Guide - Page 93

Function Menus This printer is provided with many built-in functions that can be set with the operation panel. The menus allow you to make system and option settings, clean the printhead, print test prints, and display information about the printer settings. Printer Function Priorities If the setting is different for the same item in both the operation panel and the printer driver, the printer driver setting has priority over the operation panel setting. Menu Flow Summaries The printer operation panel menus are summarized in the flowchart below. Use the arrow buttons to display the items on the menus. or Press to move to the previous or next item on the same level. Press to move to the next level below. Press to return to the previous level above. Enter Press to execute functions. TMain Menu MAIN MENU *2,3 *1 Auto Feed Force Cutting Head Cleaning *5 Auto Cut Rep. Ink Tank *4 Roll Media Type *3 Cut Sheet Type Take-up Reel RAM Version Ink Nozzle Check Status Print *6 Head Cleaning B Head Cleaning A Stand Move Printer Adjust Printer Replace P.head EOP Timer Sleep Timer Buzzer Cutter Information Test Print System Setup Interface Error MAC Address Ext. Interface IP Setting Language Ink Check Off CutDustReduct. Regis. Settings Default G/W Subnet Mask IP Address Print Pattern B Print Pattern A Auto Print *1 Displayed only when "Roll Media" selected as the Media Source and "Cutter" is enabled. *2 Displayed only when "Enable" is selected for "Take-up Reel". *3 W7200 only. *4 Displayed only when "Cut Sheet" is selected as the Media Source. *5 Displayed only when "Roll Media" is selected as the Media Source. *6 W7250 only. Function Menus 5-7