Canon imagePROGRAF iPF6350 iPF6350 User Manual ver.1.20 - Page 1065

Error Message > Messages regarding paper > Cause A print job for rolls was received when a sheet is loaded. Corrective Action Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. Cause The roll is empty. There is remaining roll paper, but because it could not be advanced, it could not be detected. Corrective Action Follow these steps to replace the used roll with a new roll of the same type and size. 1. Press the OK button and remove the roll. (See "Removing the Roll from the Printer.") →P.784 (See "Removing Rolls From the Roll Holder.") →P.786 2. Load the new roll. (See "Loading Rolls on the Roll Holder.") →P.774 (See "Loading Rolls in the Printer.") →P.778 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") →P.781 4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (See "Specifying the Paper Length.") →P.783 5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change the printing mode, which will change the paper feed timing. Choose a higher level of Print Quality in the Advanced Settings of the printer driver. (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.51 Roll feed unit error. Cause The Roll Feed Unit is not working. Corrective Action Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it. (See "Removing the Roll Feed Unit.") →P.799 (See "Installing the Roll Feed Unit.") →P.800 If the message is displayed again despite these measures, contact your Canon dealer for assistance. No Roll Unit. Cause The printer has received a print job, but the Roll Feed Unit is not installed. Corrective Action Press the Stop button and stop printing. 1. Turn the printer off and install the Roll Feed Unit. Connect the Roll Unit Cable firmly and completely. 13 1047 iPF6350 The roll is empty.