Canon imagePROGRAF iPF6350 iPF6350 User Manual ver.1.20 - Page 636

Mac OS X Software > Print Plug-In for Photoshop/Digital Photo Professional > Note • This is not displayed when a checkmark is placed in Borderless Printing. Output Image Size The output image size is displayed up to one place after the decimal point in millimeters. Note • When Paper Size is smaller than Output Image Size, part of the image may not print. Paper Size You can select the size of the print media. Note • This is not displayed when a checkmark is placed in Borderless Printing. • This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing. 5 Orientation This selects the print orientation. The following settings are available for orientation. Setting Portrait Landscape Details Prints the image on the media as it appears on the screen. Prints the image on the media rotated 90 degrees. Layout You can select the print position of an image on the media. The following settings are available for layout. Layout Setting Details Upper-Left of Output Paper Size Prints the image with fitting the top left of the active print area for Paper Size. Center of Output Paper Size Prints the center of the image on the center of the selected Paper Size. Specify Print Start Position You can print with specifying the top and left printing start positions in From Top Margin and From Left Margin for Paper Size. From Top Margin Input the margin from the top of the media in numbers. 618 *You can input between -9999 and 9999 mm. From Left Margin Input the margin from the left of the media in numbers. *You can input between -9999 and 9999 mm. Note • Select Print Area Layout or Image in Preview when you select Layout. Roll Paper Layout Page Setup Sheet iPF6350