Canon imagePROGRAF iPF6400SE User Guide - Page 146

Enhanced Printing Options Other useful settings Cutting Roll Paper After Printing (Mac OS) iPF6400SE Cutting Roll Paper After Printing (Mac OS) This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a cut line for manual cutting. • The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps Note below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead. 1 This sets the B Format for and C Paper Size. • The configuration method varies depending on the OS Note and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2 Select the printer in the A Printer list. 3 Choose the original size in the F Paper Size list. 4 If you configured the settings using the Page Attributes dialog box, click F OK to close the dialog box, and then select Print from the application software menu. 5 Access the Page Setup pane. 146 User's Guide