Canon imagePROGRAF iPF6400SE User Guide - Page 481
Rep.P.head Print, Keep Paper Size
View all Canon imagePROGRAF iPF6400SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 481 highlights
iPF6400SE System Setup Setting Item Keep Paper Size TrimEdge Reload Rep.P.head Print Nozzle Check Use RemoteUI Reset PaprSetngs Show Job Log Prep.MovePrinter User's Guide Menu Settings Description, Instructions Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to give priority to margin settings. The larger value is used if the margin specified in the printer driver does not match the margin in the printer menu. Control Panel Printer Menu Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.552 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Choose 10 pages to check once per 10 pages. Choose Off to not execute check. If On is selected in Warning, a warning may be displayed on the Control Panel depending on the result of the nozzle check. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Selecting Off prevents display of the log in Job Menu > Job Log. Additionally, the log is not printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected, the Status Monitor accounting functions will not work correctly. 481 When transferring the printer to another location, choose the level of transfer and follow the instructions on the screen. (See "Preparing to Transfer the Printer.") ➔P.600