Canon imagePROGRAF iPF680 User Guide - Page 616
Paper not aligned with right guide., Cannot detect papr, Leading edge detection error.
View all Canon imagePROGRAF iPF680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 616 highlights
Paper not aligned with right guide. iPF680 Paper not aligned with right guide. Cause Corrective Action When paper was loaded, it was not aligned with the guide on the right side. Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Pull out the sheet. 3. Pull the Release Lever forward. 4. Reload the sheet, aligning it with the guide on the right. Cannot detect papr Cause Corrective Action The printer could not detect the paper. Reload the paper as follows. 1. Remove the paper and press the OK button. 2. Reload the paper. (See "Loading Sheets in the Printer.") ➔P.392 (See "Loading Rolls in the Printer.") ➔P.373 Leading edge detection error. Cause Corrective Action The leading edge of the paper cannot be detected. Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Reload the sheet straight, in the correct position. (See "Loading Sheets in the Printer.") ➔P.392 Error Message Paper cutting failed. Cause There are sheets left on the Ejection Guide. Corrective Action 1. Push the Release Lever back and remove the paper. 2. Load the paper. 3. Pull the Release Lever forward. 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Messages regarding paper (See "Loading Rolls in the Printer.") ➔P.373 There is a foreign object by the Output Tray, obstructing the Cutter Unit. 1. Lift the Top Cover and remove the foreign object. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. You are not using the printer under the recommended environmental conditions for the paper. Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions for paper, see Paper Reference Guide." (See "Displaying the Paper Reference Guide.") ➔P.363 You are using paper that is 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll. not compatible with automat- (See "Specifying the Cutting Method for Rolls.") ➔P.386 616 ic cutting. For information about paper that is compatible with automatic cutting, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.363 2. Push the Release Lever back and remove the paper. User's Guide