Canon imagePROGRAF iPF680 User Guide - Page 622
Messages regarding printheads, Cannot adjust printhead., Wrong printhead., Printhead error
View all Canon imagePROGRAF iPF680 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 622 highlights
Cannot adjust printhead. iPF680 Messages regarding printheads Cannot adjust printhead...622 Wrong printhead...622 Printhead error ...622 Cannot recognize print head...622 Execute printhead cleaning...623 Cannot adjust printhead. Cause Corrective Action The Printhead nozzles are clogged. Execute Head Posi. Adj. again, as follows. 1. Press the OK button to clear the error. The Printhead cannot be aligned; highly transparent film is loaded. The Printhead is installed crooked. 2. Print a test pattern to check the nozzles. (See "Checking for Nozzle Clogging.") ➔P.549 3. Clean the Printhead if the nozzles are clogged. (See "Cleaning the Printhead.") ➔P.550 4. Execute Head Posi. Adj. again. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.524 Press the OK button to clear the error. We recommend using a type of paper that you often use, other than film, for Printhead adjustment. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.524 Straighten the Printhead as follows, and then execute Head Posi. Adj. again. 1. Press the OK button to clear the error. 2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead. (See "Adjusting Line Misalignment.") ➔P.527 3. Execute Head Posi. Adj. again. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.524 Error Message Messages regarding printheads Wrong printhead. Cause An incompatible Printhead has been installed. Corrective Action Open the Top Cover and replace the Printhead with a new one. (See "Replacing the Printhead.") ➔P.551 Printhead error Cause There is a problem with the Printhead. Corrective Action Open the Top Cover and replace the Printhead with a new one. (See "Replacing the Printhead.") ➔P.551 Cannot recognize print head. No Printhead is installed. Cause Corrective Action Follow these steps to install the Printhead. 1. Open the Top Cover. 622 2. Install the Printhead. (See "Replacing the Printhead.") ➔P.551 The Printhead cannot be recognized because it is not installed correctly. Follow these steps to reinstall the Printhead. User's Guide