Canon imagePROGRAF iPF770 Setup Guide - Page 8

6 If you can agree Extended Survey Program, click Agree. 7 If you can respond to the questionnaire, click Next. 8 Confirm your questionnaire responses, and click Next. 9 In the Printer Selection window, select The printer is connected directly to a computer and click Next. 10 In the Printer Installation dialog box, select Install with USB Connection, and click Next. 11 When the following dialog box is displayed, make sure the printer is on and use the USB cable to connect the printer to the computer. • If a warning message is displayed, click MEMO Retry to try again. 12 After reviewing the installation results in the Complete Installation window, click Next. 13 In the Finish window, select Restart my computer now and click Restart. • Be careful not to insert the USB cable into the LAN port. For TCP/IP (network) connections Install the software • If the printer is already connected to the network, confirm the IP address assigned to the printer. Ask your network administrator for further information. 1 Use the LAN cable to connect the LAN port on the back of the printer to the hub port. Pass the network cable through the wiring bracket (a). If the printer is already connected to the network, proceed to step 2. • If the printer is on, the Link indicator MEMO under the LAN port lights. 1000Base-T The LED on the bottom connection lights green. 100Base-TX The LED on the top lights connection orange. 10Base-T The LED on the top lights connection green. When you restart the computer, the software settings are enabled. The software installation is now completed. 2 Make sure the printer is on. Turn the computer on and insert the provided User Software CD-ROM for your operating system in the CD-ROM drive. a 3 Perform procedures of steps 2-8 on pages 7-8.