Canon imagePROGRAF iPF8400 User Guide - Page 1004
Messages regarding printing or adjustment, Cannot execute this command. Use other paper.
View all Canon imagePROGRAF iPF8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1004 highlights
Cannot execute this command. Use other paper. iPF8400 Messages regarding printing or adjustment Cannot execute this command. Use other paper 1004 Cannot adjust printhead...1007 Cannot calibrate...1004 Excessive temperature or humidity...1004 Please execute common calibration...1005 Please commn calibrt using above paper...1005 Please calibrate using above paper...1005 Borderless printng not possible. Paper stretched or shrank 1005 Before borderless printing, move the blue platen switch 1005 Borderless printng not possible...1000 Blue platen switch is dirty...1006 Move the blue platen switch No.xx to the right. (xx represents a number 1006 Cannot adjust paper feed...1006 Check printed document...1006 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. 1. Press the OK button to clear the error. Corrective Action 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See "Paper Reference Guide.") Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Error Message Messages regarding printing or adjustment Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. The test pattern was printed too faintly. Direct sunlight or strong lighting may be shining on the printer and causing the sensor to malfunction. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See "Paper Reference Guide.") Press the OK button to clear the error. Take steps to remedy faint printing. (See "Printing is faint.") →P.969 Press the OK button to clear the error. Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. 1004 Excessive temperature or humidity. Cause The temperature or humidity where the printer is installed is out of the acceptable range for operation. Corrective Action Press ▲ or ▼ to select Stop, and then press the OK button to stop printing. Use the printer under suitable environmental conditions. Also note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (See "Paper Reference Guide.") Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibration. However, note that correct adjustment may not be possible. User's Guide