Canon imagePROGRAF iPF8400 User Guide - Page 572

Using the Output Stacker iPF8400 • When printing on large, stiff sheets Use position (3). Set it to position (4) when printing banners or when printing on delicate paper. (See "Using the output stacker for ejection in front.") →P.572 • When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed documents may Important not be dropped into the Output Stacker, and the printed surface may become soiled. • The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed. • Before using the Output Stacker, remove the Rewind Spool. If you do not, it may prevent printed documents from being held correctly, and they may be scratched. • The Output Stacker can hold printed documents from rolls that are 62 inches (1,575 mm) long. When printing longer docu- ments, adjust the stacker for ejection in front, or use the optional Media Take-up Unit. The Output Stacker locks into position if you lift it to position (1) or (2). To lower the Output Stacker, lift the front Basket Rod lightly to release the lock, and then lower the stacker. Handling and Use of Paper Output Stacker Using the output stacker for ejection in front You can also set the stacker to the following position when printing banners or when printing on delicate paper. 572 User's Guide