Canon imagePROGRAF iPF8400 User Guide - Page 996

Roll printing is selected. Cause Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. iPF8400 Corrective Action Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More than one sheet may be required depending on the adjustment. Roll printing is selected. Cause You have attempted to print on a roll, but no roll is loaded. Corrective Action Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and then print. (See "Attaching the Roll Holder to Rolls.") →P.536 (See "Loading Rolls in the Printer.") →P.539 Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing. Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Follow these steps to load and print on a roll. 1. Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet. (See "Removing Sheets.") →P.568 2. Load a new roll. (See "Loading Rolls in the Printer.") →P.539 The printer now starts printing the print job. Press ▲ or ▼ to select Stop Printing, and then press the OK button. The roll is empty. Cause The roll is empty. Corrective Action Follow these steps to replace the used roll with a new roll of the same type and size. Error Message 1. Lift the Release Lever and remove the roll. (See "Removing the Roll from the Printer.") →P.545 (See "Removing the Roll Holder from Rolls.") →P.548 2. Load the new roll. (See "Attaching the Roll Holder to Rolls.") →P.536 (See "Loading Rolls in the Printer.") →P.539 Messages regarding paper 3. If no barcode was printed on the roll, specify the type of paper. (See "Changing the Type of Paper.") →P.543 4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on the roll, also specify the paper length. (See "Specifying the Paper Length.") →P.545 5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. There is remaining roll paper, but because it could not be advanced, it could not be detected. • If the trailing edge of the paper is taped to the roll paper core The paper was not advanced because the trailing edge is taped to the roll paper core. Remove the used roll paper and insert a new roll paper. (See "Removing the Roll from the Printer.") →P.545 (See "Removing the Roll Holder from Rolls.") →P.548 (See "Loading and Printing on Rolls.") →P.24 996 There is remaining roll paper, but be- The paper was not advanced because the unused portion of the roll paper is heavy and is placing a cause it could not be advanced, it burden on the printer. could not be detected. It may be helpful to change the printing mode, which will change the paper feed timing. Choose a higher level of Print Quality in the Advanced Settings of the printer driver. (See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.63 User's Guide