Canon imagePROGRAF iPF8400SE User Guide - Page 387

Handling and Use of Paper Handling rolls iPF8400SE Reducing Dust from Cutting Rolls After making the adjustment, you can cut the paper by pressing the Paper Cutting button and selecting "Cut paper". After the paper has been cut, press "Finish paper set". • If you do not press "Finish paper set" after cutting the paper, you will not be able to print again. Note • Off The edge is not cut and scraps are not removed. Follow these steps to change the Trim Edge First setting. 1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se- lect the Paper tab ( ). • If the Tab Selection screen is not displayed, press the Menu button. Note 2 Press the OK button. The Paper Menu is displayed. 3 Press ▲ or ▼ to select Paper Details, and then press the OK button. 4 Press ▲ or ▼ to select the type of paper, and then press the OK button. 5 Press ▲ or ▼ to select Trim Edge First, and then press the OK button. 6 Press ▲ or ▼ to select the desired setting option, and then press the OK button. This setting takes effect the next time you load a roll. Reducing Dust from Cutting Rolls For media such as Backlit Film that are more likely to generate debris when cut, select CutDustReduct. > On in the Paper Menu of the Control Panel. This option reduces debris from cutting by printing black lines at the leading and trailing edges of documents. It may help prevent Printhead damage. You can specify for CutDustReduct. to be activated for particular types of paper. 387 User's Guide