Canon imagePROGRAF iPF8400SE User Guide - Page 516
Network, IP Address, Enable DNS Dynamic Update, Primary DNS Server Address, DNS Domain Name
View all Canon imagePROGRAF iPF8400SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
Network Setting Configuring the Printer's TCP/IP Network Settings With RemoteUI iPF8400SE Item Use RARP Enable DNS Dynamic Update Use Zeroconf Function IP Address Subnet Mask Gateway Address LPD Printing IPP Printing IPP Printer URI RAW Printing RAW Mode Bi-direction FTP Printing Use Discovery Scope SMTP Server Address Primary DNS Server Address Secondary DNS Server Address DNS Host Name DNS Domain Name Multicast DNS Service Name Details Activate this setting to use RARP for configuring the IP address. Activate this setting to perform DNS server registration automatically. Activate this setting to use Bonjour. Specify the printer's IP address. Specify the printer's subnet mask. Specify the printer's default gateway. Activate this setting to use LDP Printing. Activate this setting to use IPP Printing. Specify the URI of the printer used for IPP printing using up to 252 characters. Activate this setting to use Raw Printing. Activate this setting to use Raw mode bidirectional communication. Activate this setting to use FTP Printing. Activate this setting to use SLP Discovery function. Enter the SLP search range. Specify the SMTP server's IP address. You can also specify the SMTP server domain name, if desired. Specify the IP address of the primary DNS server. Specify the IP address of the secondary DNS server. Specify the printer host name, up to 63 characters (1-63 characters). Use single-byte letters, numbers, and - (hyphens). Do not use numbers or - for the first character or - for the last character. Specify the printer domain name, up to 63 characters. Use single-byte letters, numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for the first character, or - or . for the last character. Specify the printer's Multicast DNS service name. (1-63 characters) This name will be displayed when Bonjour functions are used. Default Setting Off Off On 0.0.0.0 0.0.0.0 0.0.0.0 On On printer On Off On On default 0.0.0.0 0.0.0.0 0.0.0.0 NB-18GBipxxxxxx blank Canon iPFxxxx (xxxxxx) 6 Click OK to display the Network page. Initial Settings • If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports such Note protocol running in the network. • If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method is used first. If you cannot obtain the IP address, the address specified in IP Address is used. • It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing check boxes of options you will not use. • If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name, respectively. 516 User's Guide