Canon imagePROGRAF iPF9400S User Guide - Page 683

iPF9400S System Setup Setting Item Nozzle Check CarriageScanWdth Use RemoteUI Reset PaprSetngs Erase HDD Data High Speed Secure High Spd. Secure Output Method Print Print (Auto Del) Save: Box XX Print After Recv Common Box Set. Show Job Log Take-up Use Take-up Reel Reel Auto Feed Skip Take-Up Err Prep.MovePrinter Admin. Menu Change Password User's Guide Menu Settings Description, Instructions Select Warning > On to display warnings if the nozzles clog during printing. Specify the scan width of the carriage during printing. Select Automatic for movement equivalent to the width of paper loaded. Selecting Fixed will reduce any soiling on the back of the paper, although printing may take a little longer. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Erases file management data for print job data stored on the printer's hard disk. (See "Erasing Data on the Printer's Hard Disk.") →P.703 Control Panel Overwrites the entire hard disk with random data. (See "Erasing Data on the Printer's Hard Disk.") →P.703 Overwrites the entire hard disk with 00, FF, and random data (one time each). Verification is performed to check if the data was correctly written. (See "Erasing Data on the Printer's Hard Disk.") →P.703 Printer Menu Select the printing method for jobs received from software other than the printer driver. When using the printer driver, configure settings on the printer. To print as usual, select Print. Selecting Print (Auto Del) will print the job and then delete the data from the printer's hard disk. Selecting Save: Box 01 will only save the print job in the box, without printing it. A setting for jobs received from software other than the printer driver. When using the printer driver, configure settings on the printer. Select On to print the job after it has been saved. Select Print (Auto Del) to print without saving jobs in the box shared among multiple users. Selecting Off prevents display of the log in Job Menu > Job Log. Additionally, the log is not printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected, the Status Monitor accounting functions will not work correctly. Selecting Enable allows use of the Media Take-up Unit. Available only if Use Take-up Reel is already set to Enable. Rolls are automatically advanced to the position for attachment to the Rewind Spool. Available only if Use Take-up Reel is already set to Enable. Choose On to continue with printing even if an error occurs with the Media Take-up Unit. Choose Off to pause printing if a take-up error occurs. When transferring the printer to another location, choose the level of transfer and follow the instructions on the screen. (See "Preparing to Transfer the Printer.") →P.873 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. 683 The password that can be entered is a number from 0 to 9999999.