Canon imagePROGRAF iPF9400S User Guide - Page 930
Messages regarding printing or adjustment, Cannot execute this command. Use other paper.
View all Canon imagePROGRAF iPF9400S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 930 highlights
Cannot execute this command. Use other paper. iPF9400S Messages regarding printing or adjustment Cannot execute this command. Use other paper 930 Cannot adjust printhead...933 Cannot calibrate...930 Excessive temperature or humidity...930 Please execute common calibration...931 Please commn calibrt using above paper...931 Please calibrate using above paper...931 Borderless printng not possible. Paper stretched or shrank 931 Before borderless printing, move the blue platen switch 931 Borderless printng not possible...926 Blue platen switch is dirty...932 Move the blue platen switch No.xx to the right. (xx represents a number 932 Cannot adjust paper feed...932 Check printed document...932 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. 1. Press the OK button to clear the error. Corrective Action 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See Paper Reference Guide.) Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Error Message Messages regarding printing or adjustment Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. The test pattern was printed too faintly. Direct sunlight or strong lighting may be shining on the printer and causing the sensor to malfunction. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See Paper Reference Guide.) Press the OK button to clear the error. Take steps to remedy faint printing. (See "Printing is faint.") →P.896 Press the OK button to clear the error. Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. Excessive temperature or humidity. Cause Corrective Action The temperature or humidity where the Press ▲ or ▼ to select Stop, and then press the OK button to stop printing. printer is installed is out of the acceptable Use the printer under suitable environmental conditions. Also note that various environmental range for operation. conditions are recommended for various types of paper. For details on the recommended envi- ronmental conditions, see the Paper Reference Guide. 930 (See Paper Reference Guide.) Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibra- tion. However, note that correct adjustment may not be possible. User's Guide