Canon imageRUNNER 2545 User Manual - Page 77
Open a package of paper and, take out the paper stack from the, package.
View all Canon imageRUNNER 2545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3 5 4 Open a package of paper and take out the paper stack from the package. CAUTION Take care not to cut your hands on the edges of the paper when loading it into the machine. IMPORTANT Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight. NOTE • For high-quality printouts, use paper recommended by Canon. • Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding. Load the paper stack into the paper drawer. Even out the edges of the paper stack, and load the paper stack against the right wall of the paper drawer. Routine Maintenance IMPORTANT • Rolled or curled paper must be straightened out prior to use. • Make sure that the height of the paper stack does not exceed the loading limit mark ( ) both on the left and back sides of the slide guides. • Make sure that the paper size/type setting of the paper drawer matches the size/type of the paper that is being loaded. NOTE • Each paper drawer holds about 550 sheets of paper (80 g/m2) except that Drawer 1 of the imageRUNNER 2520 holds 250 sheets of paper (80 g/m2). • If there are instructions on the package of paper about which side of the paper to load facing up, follow those instructions. • When paper is loaded into the paper drawer, the side facing up is the one printed on. • If problems occur, such as poor print quality or paper jams, try turning the paper stack over and reloading it. • For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see Chapter 7, "Appendix," in the Reference Guide. 5-4 Paper Drawers