Canton DM 20 Owners Manual - Page 40

Loudspeaker Menu In the Loudspeaker Menu the following parameters can be set to adjust the DM System to the room: Personal values To save all settings set in the loudspeaker menu up to 6 memory cells () Volume adjustment To adjust the volume level of the individual channels (front left and right, subwoofer, ...) Distance To balance out different distances between the loudspeakers and the listening spot Sound To adjust the treble and bass sounds to the room and according to personal taste Bass expand For the automatic volume-dependent adjustment of the bass volume level Room adjust Various parametric equalisers are available to balance out ambient factors System Menu In the System Menu the following parameters can be set: Output config To set the parameters for the Zone 2 /Line output Sub output To activate or deactivate the subwoofer output Input config To activate and name the 6 signal inputs (see the chapter "Initial installation") IR programming To programme various remote operations (DVD player, TV, ..., see the chapter "Learn Menu") Lip sync To synchronise the sound with time-delayed TV images Dynamics To adjust the signal compression in the playback of multi-channel signals Factory Set The following parameters can be set using Factory Set: Switch-on volume Max. volume Device name Language Line 2 config Factory setting Firmware Contrast To limit the maximum switch-on volume To establish the maximum volume possible To select the device configuration (2.1 Mode or 5.1 Mode ...) To select German or English To select Line Level Input or Phono Level Input To return the DM System to the factory setting it was supplied with To display the software versions (DM, tuner and remote control) To adjust the contrast settings of the display 40