Carvin MX640 Instruction Manual - Page 15

FRONT PANEL 5 0 10 MONITOR a PROTECT O 5 MX640 SPEAKER HOOKUPS The MAIN/MON switch on the front panel above the MASTER level control allows the built in power amp to drive monitor speakers or the MAIN speakers. Both FIG. 9 & 10 will show how this is done. See item #12 on Pg 2-2 FIG 9. MX640 CONNECTIONS FOR MAIN SPEAKERS ONLY USE ONLY 16 AWG OR HEAVIER UNSHIELDED CABLE REAR PANEL ON SPEAKER OUTPUTS OFF 0 10 MASTER 0 THIS SWITCH "OUT" TO USE THE MX640's AMP FOR MAIN SPEAKERS ONLY 9 0 0 ' USE 20 240 VAC: VAC: 5 AMPS/250V 2.5 AMPS/250V USA 8 OHM MIN 8 OHM MIN A SPEAKER B SPEAKER PROV DE ADEQUATE VENTILATION (3" MINIMUM CLEARANCE) 8 OHM MIN 8 OHM MIN FRONT PANEL 5 0 10 MONITOR MAIN PROTECT O 5 MAIN SPEAKERS MAIN SPEAKERS FIG 10. MX640 CONNECTIONS FOR MONITOR SPEAKERS ONLY USE ONLY 16 AWG OR HEAVIER UNSHIELDED CABLE REAR PANEL ON SPEAKER OUTPUTS OFF 0 10 MASTER THIS SWITCH "IN" TO USE THE MX640's AMP FOR MONITOR SPEAKERS ONLY • 9 0 0 FUSE 20 VAC: 5 AMPS/250V 240 VAC: 2.5 AMPS/250V USA -*) A SPEAKER *1 B SPEAKER @.) PROV DE ADEQUATE VENTILATION (3' MINIMUM CLEARANCE) CD, 0 Co MONITOR SPEAKERS 4 - 3 MONITOR SPEAKERS