Casio DT-X10 User Guide - Page 22
Handheld Terminal or the Bridge Satellite Cradle. - usb
UPC - 079767602307
View all Casio DT-X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
11 IR Port 12 Power Contacts 13 CLR Key 14 Fn Key 15 PC Card Slot 16 USB Port 17 Headset Jack 18 Battery Pack Cover Lock Switches 19 R Trigger Key 20 L Trigger Key 21 Wrist Strap Hole 22 C-MOS Imager (C-MOS Imager models only) Reader Port (Laser Scanner models only) 23 Reset Switch 24 CF Card Slot Unit Terminal 25 Battery Pack Cover E-20 This port is used for IR data communication with another Handheld Terminal or the Bridge Satellite Cradle. Contact point for supplying power from the Bridge Satellite Cradle and Cradle-type Battery Charger. Press to clear all key inputs. Press this key and then a function key or number key to configure settings or to run previously registered applications. For insertion of a separately available PC card. For connection to a computer or other device using a USB cable. For connection of a commercially available headset (∅2.5mm). Slide these switches to lock and release the battery pack cover. Press to perform a code read operation. This is also pressed to perform a full reset. Press to perform a code read operation.This ia also pressed to cancel a full reset. Connect the wrist strap here. Reads barcodes and 2-dimensional codes. Emits a laser that reads bar codes. Press to reset the Handheld Terminal. For connection of a separately available CF Card Extension Unit. Covers the compartment that holds the battery pack. DT-X10_E_P14_36.p65 20 05.4.1, 11:04 AM