Casio DT-X10 User Guide - Page 42
Handheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite
UPC - 079767602307
View all Casio DT-X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Turn on the power. This causes the Bridge Satellite Cradle power indicator lamp to light in red. 5. Making sure that their two IR ports come into contact with each other, place the Handheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite Cradle power indicator lamp to light in green. • If the system is operating normally and data communication is enabled, the system status indicator lamp lights in green. • The communication indicator lamp flashes in green when data communication starts. When charging is initiated, indicator 2 on the DT-X10 lights up in red. When charging has been completed, indicator 2 on the DT-X10 changes color from red to green. Important! • A high-sensitivity communication element is used during IR data communication. In order to ensure successful communication, avoid using cellular phones or other devices that emit radio wave in the area where you are performing IR data communication. If you need to use such a device, move away from the communicating Handheld Terminals. In case of a cellular phone, keep it at least 30cm (117⁄8") away. • Take care to avoid allowing the Bridge Satellite Cradle power contacts to become connected to each other, which creates a short. Shorting the power contacts can damage the Bridge Satellite Cradle. E-40 DT-X10_E_P37_52.p65 40 05.4.1, 11:04 AM