Casio EX-H5SR User Manual - Page 175

Using the Dynamic Photo Extracted Sample Subjects Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjects to practice creating Dynamic Photo images by inserting them into your original snapshots or movies. Step 1: Shoot the image into which you want to insert an extracted sample subject. 1. Remove the memory card from the camera (if one is loaded). You will not be able to access the extracted sample subjects in built-in camera memory while a memory card is loaded in the camera. 2. In the REC mode, compose the image and press the shutter button to shoot a standard snapshot. You will insert the extracted sample subject into the snapshot you shoot here. Step 2: Perform the following procedure to create a Dynamic Photo image. 1. Press [p] (PLAY) to enter the PLAY mode and then press [SET]. 2. Use [8] and [2] to select the second PLAY Panel item from the bottom (Dynamic Photo) and then press [SET]. 3. Use [4] and [6] to select the snapshot you shot in Step 1 above, and then press [SET]. 4. Use [4] and [6] to select the extracted sample subject in built-in camera memory that you want to insert into the image and then press [SET]. 5. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET]. This inserts the extracted sample subject into another image and creates a Dynamic Photo image. 3 Using the Dynamic Photo Extracted Sample Subjects