Casio XJ-H1750 Wireless Guide - Page 18

Configuring Security Settings for a Wireless LAN Connection, Security Setting Flow

Page 18 highlights

Configuring Security Settings for a Wireless LAN Connection Configuring security settings prevents unauthorized access to a computer or projector over the wireless LAN. Settings are configured with the projector's System Admin page, which can be accessed with a computer's web browser. This section explains only the security settings of the System Admin page. For details about other System Admin page operations, see "System Admin Page Operations and Settings" (page 33). Security Setting Flow To configure security settings, you first need to establish a wireless LAN connection between the projector and computer. For information about establishing a connection between a projector that does not have security settings configured and computer, see "Using a Default SSID to Connect a Computer to the Projector via Wireless LAN" (page 15). Establishing a wireless LAN connection between the projector and computer On the computer, log in to the projector's System Admin page. On the System Admin page, select "Setup" and then "Wireless Setup", and configure the following settings. z Assign a new SSID to the projector. z Select a security protocol (WPA-PSK, WPA2-PSK, or WEP). z Enter the passphrase (or WEP key). Apply (register) the above settings to the projector. (At this time the wireless LAN connection between the projector and computer will be terminated.) Click the Wireless Connection 3 [Reconnect] button. On the dialog box that appears, enter the passphrase (or WEP key). This will establish a wireless LAN connection provided with security in accordance with the selected protocol. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

18
Configuring Security Settings for a Wireless LAN
Connection
Configuring security settings prevents unauthorized access to a computer or projector over the
wireless LAN. Settings are configured with the projector’s System Admin page, which can be
accessed with a computer’s web browser.
This section explains only the security settings of the System Admin page. For details about other
System Admin page operations, see “System Admin Page Operations and Settings” (page 33).
To configure security settings, you first need to establish a wireless LAN connection between the
projector and computer. For information about establishing a connection between a projector that
does not have security settings configured and computer, see “Using a Default SSID to Connect a
Computer to the Projector via Wireless LAN” (page 15).
Security Setting Flow
Establishing a wireless LAN connection between the projector and computer
On the computer, log in to the projector’s System Admin page.
On the System Admin page, select “Setup” and then “Wireless Setup”,
and configure the following settings.
Apply (register) the above settings to the projector.
(At this time the wireless LAN connection between the projector and computer will be terminated.)
Click the Wireless Connection 3 [Reconnect] button. On the dialog box that appears, enter the
passphrase (or WEP key).
This will establish a wireless LAN connection provided with security in accordance with the
selected protocol.
Assign a new SSID to the projector.
Select a security protocol (WPA-PSK, WPA2-PSK, or WEP).
Enter the passphrase (or WEP key).