Casio XJ-H2600 User Manual - Page 46
Option Settings 2 Main Menu, Important
View all Casio XJ-H2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Option Settings 2 Main Menu Setting Name Input Setting Unit Description Pointer R C V H D U N Single Use this sub-menu to specify the type of pointer that appears first when you press the [POINTER] key. Plug and Play (USB port models only) R C V H D U N Single Use this sub-menu to turn plug-and-play on or off. On*: Select this option to turn on plug-and-play. This will allow the projector detect when an external USB device is connected and make that device the input source automatically. Off: Select this option to turn off plug-and-play. Audio Out R C V H D U N Single High Altitude R C V H D U N Single Note z For details about plug-and-play, see the "USB Function Guide". z Regardless of the setting of this item, plug-and-play is disabled while the projector is in the 3D input mode ("3D Input Mode", page 17) or "On" is selected for the "Option Settings 2 J Interactive Pointer" setting. Specifies whether the input audio signal should be output from the projector's built-in speaker or to the line output. Speaker*: Outputs the audio signal being input to the projector from the speaker. Line: Outputs the audio signal being input to the projector from the AUDIO OUT terminal. Use this sub-menu to turn the high-altitude fan speed setting on or off in accordance with the altitude of the area where you are using the projector. On: Select this setting when using the projector in a high altitude (1,500 to 3,000 meters above sea level) area where air is thin. This setting increases cooling efficiency. Off*: Select this setting at normal altitudes (up to 1,500 meters). Control Panel R C V H D U N Single Lock Custom Logo R C V H D U Single Capture Important! Do not use this projector at altitudes greater than 3,000 meters above sea level. Use this sub-menu to disable (lock) and enable (unlock) the projector's control panel. On: Select this setting to disable (lock) all projector key operations except for [P] (Power). Off*: Select this setting to enable (unlock) projector key operations. See "Custom Logo Capture" (page 30). 46