Casio XJ-H2600 User Manual - Page 52

Indicator/Error Message Description and Required Action POWER LIGHT TEMP Message : Amber flashing J Amber steady :- :- : Internal temperature is too high. The projector will turn off. Power has turned off automatically due to internal overheating. Perform the following steps. 1 Check for any blocking of the projector's vents, and make sure that there is sufficient space around the projector. See "Setup Precautions" (page 11). 2 If there is dust accumulated around the vents, remove it. See "Cleaning the Projector" (page 50). If there is no problem with the projector's vents, confirm that the POWER/ STANDBY indicator is lit amber (without flashing), and then turn power back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER : Amber flashing J Red steady LIGHT : Red steady TEMP : Red steady Message : There is a problem with the fan. The projector will turn off. Power has turned off automatically due to a fan problem. Confirm that the POWER/STANDBY indicator is lit red (without flashing) and that the fan has stopped. After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER : Amber flashing J Red steady LIGHT : - TEMP : Red steady Message : A system problem has occurred. The projector will turn off. Power has turned off automatically due to a system problem. After confirming that the POWER/STANDBY indicator is lit red (without flashing), disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER LIGHT TEMP Message : Green steady :- :- : A system problem has occurred. Normal projection is not possible. A system problem has occurred, which may cause problems with some functions. Turn off the projector, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. POWER : Green steady LIGHT : - TEMP : - Message : There is some problem with the system. The audio function may not operate correctly. POWER LIGHT TEMP Message : Green steady :- :- : Some problem occurred with the USB port or LAN terminal. The USB or LAN connection was terminated because of a problem with the USB port or LAN port. To use the USB or LAN function, turn off the projector and then turn it back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. 52