Cisco 2620 User Guide - Page 1

Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy Level 2 Validation Version 1.3 June 2, 2004 Introduction This is the non-proprietary Cryptographic Module Security Policy for the 2621XM and 2651XM Modular Access Routers with AIM-VPN/EP. This security policy describes how the 2621XM and 2651XM routers (Hardware Version: 2621XM, 2651XM; AIM-VPN/EP: Hardware Version 1.0, Board Version B0; Firmware Version: IOS 12.3(3d)) meet the security requirements of FIPS 140-2, and how to operate the 2621XM and 2651XM routers in a secure FIPS 140-2 mode. This policy was prepared as part of the Level 2 FIPS 140-2 validation of the 2621XM and 2651XM routers. FIPS 140-2 (Federal Information Processing Standards Publication 140-2-Security Requirements for Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More information about the FIPS 140-2 standard and validation program is available on the NIST website at http://csrc.nist.gov/cryptval/. This document contains the following sections: • Introduction, page 1 • The 2621XM/2651XM Router, page 2 • Secure Operation of the Cisco 2621XM/2651XM Router, page 17 • Related Documentation, page 19 • Obtaining Documentation, page 19 • Documentation Feedback, page 20 • Obtaining Technical Assistance, page 20 • Obtaining Additional Publications and Information, page 22 Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2001. Cisco Systems, Inc. All rights reserved.