Cisco 2620 User Guide - Page 19

Related Documentation - esp-sha-hmac - esp-3des - esp-aes • The following algorithms are not FIPS approved and should be disabled: - MD-4 and MD-5 for signing - MD-5 HMAC Protocols All SNMP operations must be performed within a secure IPSec tunnel. Remote Access • Telnet access to the module is only allowed via a secure IPSec tunnel between the remote system and the module. The Crypto officer must configure the module so that any remote connections via telnet are secured through IPSec. • SSH access to the module is only allowed if SSH is configured to use a FIPS-approved algorithm. The Crypto officer must configure the module so that SSH uses only FIPS-approved algorithms. Related Documentation For more information about the Cisco 2621XM and Cisco 2651XM modular access routers, refer to the following documents: • Cisco 2600 Series Modular Routers Quick Start Guide • Cisco 2600 Series Hardware Installation Guide • Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy OL-6262-01 19