Cisco 3845 Hardware Guide - Page 116
DIMM Location and Orientation, Removing an SDRAM DIMM
![]() |
UPC - 746320981420
View all Cisco 3845 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
SDRAM DIMM Removal and Installation DIMM Location and Orientation The two SDRAM DIMM connectors are located on the motherboard and are identified as MEMORY 0 and MEMORY 1 on the Cisco 3825 router, and as MEM0 and MEM1 on the Cisco 3845 router. See Figure 51 and Figure 52 for DIMM locations. DRAM DIMMs have a polarization notch on the mating edge to prevent incorrect insertion. Figure 53 shows the polarization notch on a DRAM DIMM. Figure 53 DRAM DIMM Polarization Notch 103362 Polarization notch Removing an SDRAM DIMM To remove an SDRAM DIMM from the motherboard, follow these steps: Step 1 Pull the latches away from the DIMM at both ends. This lifts the DIMM slightly. Lift the DIMM completely out of the connector. See Figure 54. Figure 54 Removing a DRAM DIMM 2 1 1 121392 1 Release the latches 2 Remove the DIMM Installing and Upgrading Internal Components in Cisco 3800 Series Routers 86 OL-5975-04
![](/manual_guide/products/cisco-cisco3825acip-hardware-guide-822488c/116.png)