Cisco 3845 Hardware Guide - Page 65

Power-Up Procedure Table 4 LED Indications During Power-up LED Label Color and State SYS Off Steady green Blinking green Amber SYS PWR Off (Cisco 3825) Steady green SYS PWR1 Off or SYS PWR2 (Cisco 3845) Steady green AUX PWR (Cisco 3825) AUX PWR1 AUX PWR2 (Cisco 3845) Off Steady green Amber ACT Off Steady or blinking green RPS (Cisco 3825) CF GE0: Link GE0: Speed Off Steady green Off Steady green Blinking green Off Green Blinking green GE1: Link GE1: Speed Off Green Blinking green Meaning Router not receiving power Normal operation (power-up complete) Booting or in ROM monitor mode (immediately after power-up) Powered but malfunctioning Router not receiving power Normal operation (immediately after power-up) Router not receiving power, power supply not present, or power-up not completed Normal operation of indicated power supply (power-up completed) IP phone power off or not present, or power-up not completed Normal operation (power-up completed) Powered but malfunctioning No packet activity or power-up not completed Packets transmitted or received on any WAN or LAN port, or router is monitoring internal activities (power-up completed) Connected to primary power source or power-up not completed Connected to Cisco Redundant Power System (power-up completed) CompactFlash memory card not being accessed CompactFlash memory card being accessed; do not eject CompactFlash memory card being accessed; do not eject No link Ethernet cable present, link established Blink frequency indicates port speed: 1 blink per second: 10 Mbps 2 blinks per second: 100 Mbps 3 blinks per second: 1000 Mbps No link Ethernet cable present, link established Blink frequency indicates port speed: 1 blink per second: 10 Mbps 2 blinks per second: 100 Mbps 3 blinks per second: 1000 Mbps OL-5971-01 Powering Up Cisco 3800 Series Routers 35