Cisco 5580-40 Hardware Installation Guide - Page 10

About This Guide Short-Circuit Protection Warning Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Compliance with Local and National Electrical Codes Warning Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 TN Power Warning Warning The device is designed to work with TN power systems. Statement 19 Multiple Power Cord Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit, disconnect the power cord of the power strip that the unit is plugged into. Statement 137 Circuit Breaker (15A) Warning Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13 Grounded Equipment Warning Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39 Safety Cover Requirement Warning The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed. Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and electrical hazards. Statement 117 Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide x OL-12920-01