Cisco 5580-40 Hardware Installation Guide - Page 71
Closing the Heatsink Retaining Bracket, Step 11
![]() |
View all Cisco 5580-40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 4 Maintenance and Upgrade Procedures Upgrading the ASA 5580-20 to an ASA 5580-40 Step 11 Close the heatsink retaining bracket, see Figure 4-20. Figure 4-20 Closing the Heatsink Retaining Bracket 242081 Step 12 Install the processor power module. The processor power module is keyed and the key must be aligned when installed, see Figure 4-21. Note Always install a processor power module when you install a processor. The system fails to boot if the corresponding processor power module is missing. OL-12920-01 Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide 4-21
![](/manual_guide/products/cisco-558040-hardware-installation-guide-2683113/71.png)
4-21
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
OL-12920-01
Chapter 4
Maintenance and Upgrade Procedures
Upgrading the ASA 5580-20 to an ASA 5580-40
Step 11
Close the heatsink retaining bracket, see
Figure 4-20
.
Figure 4-20
Closing the Heatsink Retaining Bracket
Step 12
Install the processor power module. The processor power module is keyed and the key must be aligned
when installed, see
Figure 4-21
.
Note
Always install a processor power module when you install a processor. The system fails to boot
if the corresponding processor power module is missing.
2420
8
1