Cisco AS5200 Installation Guide - Page 12
Connect a Modem for Remote, Administrative Access, Optional
View all Cisco AS5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 Install the Universal Access Server (continued) H10341 RJ-45-to-RJ-45 rollover cable Universal access server Auxiliary port (RJ-45) (labeled AUX) Modem 10 RJ-45-to-DB-25 adapter (labeled MODEM) Connect a Modem for Remote Administrative Access (Optional) To configure the access server from a remote location, you will need an RJ-45-to-RJ-45 rollover cable and a modem adapter (RJ-45-to-DB-25) to connect a modem. If you will not be using a modem to configure the access server remotely, skip this procedure and go to the next page. Note: The cable and adapter are included. The modem is not included. Step 1 Connect the adapter labeled MODEM to your modem. Step 2 Connect the RJ-45-to-RJ-45 rollover cable to the adapter. Step 3 Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled AUX on the rear panel of the access server.