Cisco AS5200 Installation Guide - Page 3

1 Tools and Equipment Items Included Items Not Included • Cisco AS5200 universal access server • Four screws for installing the chassis in a rack • 19- and 24-inch rack-mount brackets • Rubber feet for desktop installation • T1 channel service unit/data service unit (CSU/DSU) or E1 networks terminating unit • Jackscrews and slide-latch connector kit for your • PC running terminal emulation software for optional Ethernet transceiver (transceiver not administrative access included) • Modem for remote administrative access • RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL) • Ethernet transceiver and a straight-through • RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL) RJ-45-to-RJ-45 cable (for connection from the Ethernet transceiver to an Ethernet hub) OR Ethernet AUI cable • RJ-45-to-DB-25 male DCE adapter (labeled MODEM) • Straight-through RJ-48C-to-RJ-48C cable for a T1 connection 1 • RJ-45-to-RJ-45 rollover console cable • ESD-preventive wrist strap • Serial transition cable • Two nylon cable ties • E1 cable for an E1 connection • Two cable tie holders • Slot cover for unused slots • Grounding lug • Power cord • 19-inch telco rack-mount brackets (P/N 700-01928-01) • Quick Start Guide (this document) • Cisco AS5200 Universal Access Server Hardware Installation Guide • Cisco AS5200 Universal Access Server Software Configuration Guide Ordering Information To place an order, contact Cisco Customer Service at 408 526-4000 or 800 553-6387. • Regulatory Compliance and Safety Information document • Release Notes for the specific Cisco IOS release installed on the access server • Documentation CD-ROM