Cisco ASA5550-BUN-K9 Hardware Installation Guide - Page 9
Compliance with Local and National Electrical Codes Warning - power
UPC - 882658096334
View all Cisco ASA5550-BUN-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
About This Guide Short-Circuit Protection Warning Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Compliance with Local and National Electrical Codes Warning Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 DC Power Connection Warning Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position. Statement 8 AC Power Disconnection Warning Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units. Statement 246 TN Power Warning Warning The device is designed to work with TN power systems. Statement 19 48 VDC Power System Warning The customer 48 volt power system must provide reinforced insulation between the primary AC power and the 48 VDC output. Statement 128 Multiple Power Cord Warning This unit has more than one power cord. To reduce the risk of electric shock when servicing a unit, disconnect the power cord of the power strip that the unit is plugged into. Statement 137 Circuit Breaker (15A) Warning Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13 78-17989-01 Cisco ASA 5500 Series Hardware Installation Guide 7