Cisco ASR1004-10G/K9 Hardware Installation Guide - Page 81
-Port OC-48c/STM-16 POS SPA LEDs
View all Cisco ASR1004-10G/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs 1-Port OC-48c/STM-16 POS SPA Overview • 1-Port OC-48c/STM-16 POS SPA LEDs, page 3-39 • 1-Port OC-48c/STM-16 POS SPA Interface Specifications, page 3-40 • 1-Port OC-48c/STM-16 POS SPA Optical Transceiver Modules, Connectors, and Cables, page 3-41 1-Port OC-48c/STM-16 POS SPA LEDs The 1-Port OC-48c/STM-16 POS SPA has eight LEDs, as shown in Figure 3-25. Figure 3-25 1-Port OC-48c/STM-16 POS SPA Faceplate 13 2 5 4 6 WPARSASPTMHARTUESYNC C/A 0 A/L CARRIEARCTIVE 7 SPA-1XOC48POS/RPR SPA-1XOC12-POS 8 STATUS 149965 1 WRAP LED 2 PASSTHRU LED 3 MATESYNC LED 4 C/A (Carrier/Alarm) LED 5 CARRIER LED 6 ACTIVE LED 7 A/L (Active/Loopback) LED 8 STATUS LED Note The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. Table 3-24 describes the 1-Port OC-48c/STM-16 POS SPA LEDs. Table 3-24 1-Port OC-48c/STM-16 POS SPA LEDs LED Label WRAP PASSTHRU MATESYNC C/A A/L Color Off Green Amber Off Amber Off Green Off Green Amber Off State Off On On Off On Off On Off On On Off Meaning Port is not in wrap mode. Port is in wrap mode somewhere on the ring. Port is in wrap mode locally. Port is not in pass-through mode. Port is in pass-through mode. Mate port is not synchronized. Mate port is synchronized. Port is not enabled by software. Port is enabled by software. Port is enabled by software, and there is at least one alarm. Port is not enabled by software. OL-14126-12 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-39